JVC TH-A104 manual Selecting the analog or digital input Mode, Changing the decode mode

Page 20

Basic operations

Selecting the analog or digital input

mode

When you have connected some components such as MD recorder, the DBS tuner and so on, using digital terminals (see page 9), you need to change the input mode for these components to the digital input.

You can choose digital sound from the following sources: “MD”, “DBS”, “AUX”.

From primary remote control only:

2 1

1. Press the source selecting button (TAPE/MD, AUX, or TV/DBS) for which you want to change the input mode from analog input to digital input.

Example: Selecting MD recorder as the source for digital audio.

2. Press ANALOG/DIGITAL INPUT.

The display changes as shown below each time the button is pressed.

To return to analog audio

1. Select a digital source to return to analog audio.

Select from “MD DIGITAL”, “AUX DIGITAL”, or “DBS DIGITAL”.

2. Press ANALOG/DIGITAL INPUT to select [ANALOG].

Analog audio is selected and the source name also returns to analog.

Note:

When selecting a digital source, press ANALOG/DIGITAL INPUT once to display the currently selected mode.

Changing the decode mode

From primary remote control only:

1

2

1. Press DVD to select DVD as the source.

2. Press ANALOG/DIGITAL INPUT to select the decode mode.

The display changes as shown below each time the button is pressed.

=AUTO/PCM =DOLBY DGTL (DOLBY DIGITAL) =DTS

=AUTO/PCM =DOLBY DGTL (DOLBY DIGITAL) =DTS =

ANALOG =(back to the beginning)

3. Press ANALOG/DIGITAL INPUT to select [AUTO/PCM].

«After approximately 3 seconds

=(back to the beginning)

AUTO/PCM

Optimized for all discs playable on this

 

system. (Default)

DOLBY DGTL

Select this mode when playing a disc

 

recorded in Dolby Digital Surround.

DTS

Select this mode when playing a DVD disc

 

recorded in DTS Surround.

 

The DTS decoder will be selected as the

 

internal decoder.

MPEG

Select this mode when playing a disc

 

recorded in MPEG Multicahnnel Surround.

 

The MPEG decoder will be selected as the

 

internal decoder.

• The source name changes from “MD” to “MD DIGITAL”.

When other than [AUTO/PCM] is selected

When “DOLBY DGTL”, “DTS”, or “MPEG” is selected the source name changes to digital (“MD” = “MD DIGITAL”) and audio is not played.

The decode mode indicator “DOLBY DGTL”, “DTS”, or “MPEG” in the display window flashes to indicate that the correct mode has not been selected.

Example: Selecting “DOLBY DGTL” when listening to MD with digital audio.

18Flashes

When to try changing the decode mode

When the decode mode is set to the default AUTO/PCM setting and a DVD recorded in Dolby Digital Surround, DTS Digital Surround, or MPEG Multichannel Surround is played, the internal decoder will be automatically selected before audio playback begins. Depending on the disc, this may result in a brief loss of audio after playback starts. This is due to lost audio signals that were inputted during internal decoder selection.

In these instances, lost audio can be prevented by manually selecting the decode mode appropriate for the disc you wish to play.

However, please note that when the decode mode is set to other than AUTO/PCM, you will be unable to playback audio from discs recorded in a mode other than the set mode.

After changing the decode mode and playing back a disc, return the decode mode to “AUTO/PCM”.

Changing the playback source will automatically set the decode mode to “AUTO/PCM”.

Image 20
Contents TH-A10 Class Laser Product Table of Contents Safety precautions Checking the supplied accessoriesGetting Started Important cautionsSystem outline Center speaker SP-XCA10 Front left speakerRear left speaker Front right speakerInstallation Adjusting the angle of the satellite speakersSpeaker To hang satellite speakers from the wallAbout discs Playable disc typesDisc structure Video CDs or SVCDs with Playback Control functionConnecting the TV ConnectionsAM antenna connections FM antenna connectionsConneceting the front speakers Connecting the rear and center speakersTo connect speakers Analog connections Video component connectionsAnalog component connections If your audio components have a Compu LINK-3 terminalDigital connections TV audio or DBS tunerConnecting the power cord Light up the primary remote control buttonsPlug the power cord into an AC outlet Center unit Power sub wooferPowered sub woofer Parts IdentificationCenter unit Display windowRemote controls Primary remote controlOperation with the remote control Principles of operationTo operate via the on-screen menu Displaying the on-screen menuOn-screen menu components Basic operation with the on-screen menuOn-screen menus On-screen menus for using discs On-screen menus for setting up the DVDPreventing screen burn-out with Screen saver Screen Saver Opening screens VCD Control displayTo turn the system power supply On and OFF standby To turn TV power on and OFFAdjusting volume Basic operationsMuting the sound Selecting the source to playChanging the source name Press one of the source selecting buttonsSelecting the analog or digital input Mode Changing the decode modeAudio channel display lamp Adjusting the Input Signal LevelSub woofer volume control Phase setting Using the Sleep Timer Using the DSP ModesPress Sleep repeatedly To check or change the time remaining until Shut-off timePress DSP Mode Before recording a digital source, turn off the DSP modeWhen selecting DAP DAP modesUsing the DVD player To play a discPausing Locating the beginningResuming playback Selecting playback from the DVD menuPress ¢or Press Resume during playbackSelecting 11 or higher When appears on the TV screenPress Return to return to the menu screen To play from the beginning of a title Chapter, or track To specify the chapter number for Playback CHAP. SearchTo specify the time for playback Press DVD on ScreenUse the number buttons 0 ~ 9 to enter the time To select the screen for playback from Digest screen DigestPress Digest Slow-Motion Playback Slow To display Continuous Photos StrobePress Pause at the section you wish to view in slow motion Hold down FF/¢or 4/REW for more than 2 secondsUsing the Subtitle button Zooming a scene ZoomChanging the Subtitle Language Press ZoomChanging the audio channel Audio Use the 5/∞cursors to move the pointer SubutitleUse the 2/3cursors to select the desired subtitle Use the 5/∞cursors to move the pointer to AudioPress and hold Angle for more than 1 seconds Selecting a scene angle from the on-screen displayUse the 2/3cursors to select the desired angle number Selecting an angle from the angle list displaySelecting the Picture Character Or all tracks RepeatSampling all tracks Intro Programming the Playing Order Tracks Program Use the 5/∞cursors to move the pointer to Time SelectRandom Play Random Press Play to start program playUse the 5/∞cursors to move the pointer Random Quitting programmed playbackReceiving radio broadcasts Setting the AM tuner interval spacingTuning in stations manually Selecting the FM reception mode When an FM stereo broadcast is hard to receive or noisyPress FM Mode Beat cutPerforming miscellaneous settings DVD settings on-screen displayMain Menu Sound Menu Speaker MenuOpening the Main Menu Main Menu SettingsSetting the Sleep Timer Move the pointer to Decode Mode using the 5/∞ cursors Changing the DSP ModeAdjusting the volume Sound Menu Settings Adjusting the balanceUsing Loudness Opening the Sound MenuAdjusting input signal Adjusting the DSP effectOpening the Speaker Menu Speaker Menu SettingsSwitching speaker mode Setting speaker size Use the 2/3cursors to select Speaker SizeSet speaker size Speaker parametersAdjusting delay time Adjust speaker levelAdjusting delay time After adjusting speaker levelsDVD Menu Settings Opening the DVD MenuChoosing menu language Change source to DVD, and stop playbackOn-screen guide settings Move the pointer to Audio Language usingChoosing audio language Choosing subtitle languageScreen saver settings Select monitor typeLB Letter Box Conversion PS Pan-scan ConversionLimiting playback by children Use the 5/∞cursors to move the pointer toParental lock level Buttons 0 ~To change the settings Enter your 4-digit password using the number buttons 0 ~To temporarily release the Parental lock YES or NO, then press EnterHow to handle discs Maintenance of discsCare and handling of discs Label sideTo Video input AV Compu Link Remote Control SystemConnections Automatic Selection of TV’s Input Mode Automatic Power On/OffRemote control of the TV and VCR using this remote control When system power is onAutomatic Source Selection Compu Link Remote Control SystemRemote Control through the Remote Sensor on the center unit Operating JVC’s Audio/Video Components To operate JVC’s audio components using this remote controlTo operate JVC’s video components using this remote control Cassette deck MD recorderVCR TV VOL +Enter manufacturer’s code two digits using Press TV/DBSRelease TV/CATV/DBS Press and holdPressing TV/CATV/DBS Press VCRTry to operate your VCR by pressing VCR ReleaseTroubleshooting Problem Possible Cause SolutionSpecifications Powered Sub-woofer SP-PWA10Center unit XV-THA10 Satellite Speakers SP-XSA10Appendix a Table of languages and their abbreviations Appendix B Country code list for parental lock Page EN. SP 0900TNMNATJSC Satellite speaker rear right speaker Powered sub-woofer Satellite speaker Center speaker Front left stpekerNon-slip rubber Satellite speaker rear left speakerAjuste del ángulo de los altavoces satélite