Kambrook KI460KM, KI400 manual Anti Drip System, After Each Use

Page 10

Operating Instructions

continued

Anti Drip System

The Kambrook SpeedSteam Iron is equipped with an Anti-Drip System. The iron will automatically close the steam valve when the soleplate temperature is too low to produce steam. When this happens you will hear a click sound. It is safe and will not harm the performance of the iron.

This is the reason the Fine Mist Spray should be used when ironing delicate fabrics at low temperatures.

The steam valve will open once the soleplate has reached the temperature required to create steam.

After Each Use

Set the steam selector to the MIN position and turn the Temperature Control to MIN.

Switch the power off at the power outlet and disconnect the power cord from the power outlet.

Open the Water Tank Inlet and (over a sink or bucket) invert the iron to empty the remaining water from the tank.

Stand the iron in an upright position and allow to cool.

10

KI400_KI460KM IB v1.indd 10

23/12/09 10:43 AM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Instruction Booklet Please retain your instruction book for future use Contents Important Safeguards For Your Kambrook SpeedSteam Iron Important Safeguards For All Electrical Appliances Your Kambrook SpeedSteam Iron Not ShownOperating Instructions Setting the TemperatureBefore First Use Steam Ironing To Operate Steam ControlVertical Steam Shot How To Use Shot Of SteamUsing the Fine Mist Spray Dry IroningAnti Drip System After Each UseCare and Cleaning Cleaning the Soleplate and ExteriorKambrook 12 Month Replacement Warranty
Top Page Image Contents