Morphy Richards Turbo steam iron manual Helpline, To clean a coated soleplate

Page 7

turbo steam RN40655 Rev 1 23/7/04 1:34 PM Page 7

To clean a coated soleplate

(certain models only)

In the unlikely event of any man-made fibre fusing to the soleplate, set the iron at the 3 dot position and pass it over a clean piece of cotton which will draw the deposit off the surface.

Do not use scouring powder or solution as this could cause damage to the coating.

To clean an aluminium soleplate

To keep the soleplate clean and free of limescale, make a paste of mild scouring powder and a little water. Apply a small amount to the soleplate, rub and then remove with a damp cloth. Wipe thoroughly with a clean cloth.

To clean the exterior

Allow the iron to cool and wipe over with a damp cloth and mild detergent, then wipe with a dry cloth.

Helpline

If you have any difficulty with your appliance, do not hesitate to call us.

We are more likely able to help than the store from where you bought it.

Please have the following information ready to enable our staff to deal with your query quickly.

Name of the product

Model number as shown on the underside of the appliance.

7

Image 7
Contents Turbo steam iron steam/spray/shot Special instructions Important safety instructionsElectrical requirements Temperature guideInstructions for use Filling Temperature controlComponents of your iron Before useFeatures of your iron Life long anti-scale system MaintenanceJet cleaning Auto shut-offTo clean an aluminium soleplate To clean a coated soleplateHelpline Your two year guarantee