Hoover WDYN D8P manual

Page 14

Step 5. Switch off the machine at the end of the cycle by turning the Programme Selector to the OFF position.

Step 6. Select the spin programme and press the Start Pause button to start the machine. If the machine takes longer than one minute to empty check the drain hose for kinks.

Installation testing is now complete.

Now you have successfully installed the machine we advise that you run the machine to ensure the drum is thoroughly clean after testing and storage. Select Cottons 90°C programme and run the machine for a complete cycle using only wash detergent and water.

This programme will take approximately 2 hours to complete.

14

Image 14

Contents Instruction Book Contents Delivery information GuaranteeIntroduction Customer Service Technical dataCaring for the environment European Directive 2002/96/ECInstructions Page Unpacking the Product Installation Electricity SupplyWater Supply Connecting the Cold Water Supply Connecting the drainage pipe Testing the Installation Levelling The MachinePage Description of the Machine Turning the Machine On Cancelling and Changing the ProgrammeControl Panel Start Pause ButtonDigital Display Wash TemperatureDoor Locked indicator Spin SpeedDrying Programme Indicators Delay StartKG Mode Indicator Wash Length IndicatorNight & Day TemperatureWash Options Sensitive CareWash Time Selector DRY Options Out of Balance protection Automatic FeaturesKG Mode Half Load Pulse TechnologyColoureds Programme DescriptionsCotton with Pre Wash SyntheticsSports DelicateRapid Wool & SilkWash & Dry 59’ High DryLow Dry All BabyProgramme Guide ProgrammeLength of Programme Detergent Dispensing in the drum LaundryDispensing instructions Items to avoidWashing Advice Running a Wash Cycle When the programme has ﬁnished Sort the load before drying Drying AdviceItems to avoid when drying Selecting the drying programme Running a Dry CycleSorting the laundry Starting the drying cycleEstimated drying times of Sensor Dry programmes Cleaning the door glass Care and MaintenanceCleaning the soap dispenser Cleaning the ﬁlterMaintenance wash Defects you can remedy yourself Problem Solving GuideWater does not drain away… error 3 will be displayed Machine will not start…Machine is noisy or vibrates a lot during the cycle… Water on the ﬂoor around the washing machineMachine does not spin… Programme takes a long time…Clothes load is not dry… Problem with the dispenser…Error 9 is displayed… Power Failure Guarantee After Sales ServiceCustomer Service 0844401204 556 Guarantee excludesSpares and Accessories BrochuresPage Page Page Page EnItalie enItalie