About washer features.
Safety Instructions
Operating Instructions
Do not pour anything into the agitator if the agitator cap or dispenser is removed.
The Agitator Cap or Fabric Softener Dispenser
The agitator cap fits into the top of the agitator. If it accidentally comes off, simply put it back on.
The fabric softener dispenser automatically releases liquid fabric softener at the proper time during the cycle.
Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.
To use, follow these steps:
1 Make sure dispenser is securely attached to agitator.
2 Use only liquid fabric softener. Pour into dispenser, using amount recommended on package.
Never pour fabric softener directly on clothes. It may stain them.
3 Add water to dispenser until it reaches the maximum fill line.
Troubleshooting Tips
Consumer Support
Separate for cleaning.
Cleaning the Fabric Softener Dispenser
1 Remove the dispenser from the top of the agitator.
2 Separate the dispenser cup from the cover by grasping the top and pushing down on the inside of the cup with your fingers. Dispenser cup will pop free from the cover.
3 To clean the dispenser, soak both the dispenser cup and the dispenser cover in the following solution:
■1 US gallon (3.8 liters) warm water
■1/4 cup (60 ml) heavy duty liquid detergent
■1 cup (240 ml) bleach
4
5
If necessary, loosen
Rinse and reassemble dispenser. Place dispenser back on the agitator.
10