Sharp XG-SV100W, XG-SV200X appendix Compatibility Chart, Computer, Appendix

Compatibility Chart

Computer

• Multiple signal support						Pixel Clock: 12-165 MHz
Horizontal Frequency: 15-110 kHz,						Sync signal: Compatible with TTL level
Vertical Frequency: 45-85 Hz,					• Compatible with sync on green signal
PC/MAC	Mode	Resolution	Horizontal	Vertical		Analog	Digital		Display
			frequency [kHz]	frequency[Hz]		Support	Support	XG-SV100W		XG-SV200X
			26.2	50		✔
			31.5	60		✔	✔
	VGA	640 × 480	34.7	70		✔
			37.9	72		✔	✔
			37.5	75		✔	✔
			43.3	85		✔
			31.3	50		✔				Upscale
			35.2	56		✔	✔
			37.9	60		✔	✔	Upscale
	SVGA	800 × 600	46.6	70		✔
			48.1	72		✔	✔
			46.9	75		✔	✔
			53.7	85		✔
			40.3	50		✔
			48.4	60		✔	✔
	XGA	1024 × 768	56.5	70		✔	✔			TRUE
			60.0	75		✔	✔
PC			68.7	85		✔
		1280 × 720	45.0	60		✔	✔
		1280 × 768	47.8	60		✔	✔	TRUE
	WXGA	1280 × 800	49.7	60		✔	✔
			62.8	75		✔
		1360 × 768	47.7	60		✔	✔
		1366 × 768	47.8	60		✔	✔
	WXGA+	1440 × 900	55.9	60		✔
			55.0	60		✔
		1152 × 864	66.2	70		✔				Intelligent
			67.5	75		✔				Compression
	SXGA	1280 × 960	60.0	60		✔	✔	Intelligent
			75.0	75		✔		Compression
		1280 × 1024	64.0	60		✔	✔
			80.0	75		✔	✔
	SXGA+	1400 × 1050	64.0	60		✔	✔
			65.3	60		✔	✔
	WSXGA+	1680 × 1050	65.3	60		✔
	UXGA	1600 × 1200	75.0	60		✔
MAC 13"	VGA	640 × 480	34.9	67		✔				Upscale
MAC 16"	SVGA	832 × 624	49.7	75		✔		Upscale
MAC 19"	XGA	1024 × 768	60.2	75		✔				TRUE
MAC 21"	SXGA	1152 × 870	68.7	75		✔		Intelligent		Intelligent
								Compression		Compression

Note

•Optimum image quality will be achieved by matching your computer's output resolution to the resolution that corresponds to “TRUE” in the “Display” column shown above.

•When “Screen resolution” of the computer is different from the resolution displayed on the projected image, follow the procedures shown below.

–Refer to “Resolution” on the “SIG” menu and select the same resolution as the resolution in “Screen resolution” of the computer.

–Depending on the computer you are using, the output signal may not be faithful to the “Screen resolution” adjustment. Check the settings of the computer's signal output. If the settings cannot be changed, it is recommended that the resolution be set to the one that corresponds to “TRUE” in the “Display” column.

Appendix

75