Sharp XG-SV100W, XG-SV200X Adjust the angle, Adjust the focus and the zoom, Select the Input mode

On-screen display

BP. 31

4. Adjust the angle

Adjust the projector angle:

• Shift the lens horizontally and vertically.

1 Press H&V SHIFT on the remote control. 2 Press P, R, O or Q on the remote control.

• Adjust the projector angle by rotating the adjustment feet.

BP. 29

5. Adjust the focus and the zoom

1Press FOCUS +/– on the remote control to adjust the focus.

2 Press ZOOM +/– on the remote control to adjust the zoom.

BP. 30

6. Correcting the image distortion due to the projection angle

1Press KEYSTONE on the projector or on the remote control.

2 Press ENTER on the projector or on the remote control.

3 Press P, R, O or Q to move the position for the upper left of the image.

4 Press ENTER to set the position.

5 Repeat the same procedure with the positions for the upper right, lower right and lower left of the image.

•When the position of the lower left is set, the correction is

made and the display disappears.

7. Select the Input mode

On the projector

Press INPUT R/P to display the INPUT list. Use INPUT R/P to select the Input mode, and use O/Q to select the audio input terminal.

INPUT list		On the	On the remote
INPUT	Audio	projector	control

1 COMPUTER1

2 MONITOR OUT

HHDMI

On the remote control

Press HDMI, COMPUTER 1/2, S-VIDEO, VIDEO

to select the Input mode.

BP. 34

8. Turn the power off

Press STANDBY/ON on the projector or STANDBY on the remote control, and then press the button again while the confirmation message is displayed to put the projector into Standby mode.

On the	On the remote
projector	control

BP. 27

Easy Start

17