Sharp XG-SV100W, XG-SV200X appendix Adjusting the Volume, On-screen display, Basic Operation

Adjusting the Volume

Press VOL +/– on the remote control or on the projector to adjust the volume.

Note

•Pressing VOL– will lower the volume.

•Pressing VOL+ will raise the volume.

•When the projector is connected to external equipment, the volume level of the external equipment changes in accordance with the volume level of the projector. Set the projector's volume to the lowest level when turning the projector on/off or when changing the input signal.

•When you do not want to output the sound from the projector's speaker while the projector is connected to external equipment, set “Speaker” in the “Audio” menu to “Off”. (See page 51.)

AV MUTE button

VOL +/– (Volume) buttons

On-screen display

Displaying the Black Screen

and Turning Off the Sound

Temporarily

Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound.

Basic Operation

Note

On-screen display

•Pressing AV MUTE again will turn the projected image back on.

35