Sharp XG-SV100W, XG-SV200X appendix Adjusting the Color Temperature, Adjusting the Colors

Adjusting the Color

Temperature

Selectable	Description
items
	For lower color temperature for
–2	warmer, reddish incandescent-like
0	images.
+2
	For higher color temperature for
	cooler, bluish, fl uorescent-like images.

Menu operation n Page 46

•If there is data for the stored corrected color, the C.M.S. color adjustment screen is displayed. (Go to step 3.)

C.M.S.1
Select Color
Hue	0
Saturation	0
Value	0
Effect	0
C.M.S.1	On
Reset
Return
SEL./ADJ.		ENTER
RETURN		END

Note

•Values on “CLR Temp” are only for general standard purposes.

•“CLR Temp” cannot be set when “sRGB” is selected.

4 Adjusting the Colors

You can select the color of the projected image to correct and then adjust it to the desired color by setting “Hue”, “Saturation”, “Value”, and “Effect”.

Note

•Before performing this adjustment, prepare the image to be adjusted.

•You can perform this adjustment easier in the still image than in the moving image.

1 Select “C.M.S.1” or “C.M.S.2” (C.M.S.: Color Management System), and press ENTER.

•If there is no data for the stored corrected color, the color selection screen and the picker is displayed. (Go to step 2.)

Picker

2 Use the picker and select the color of the projected image to correct. The picker can be operated by adjustment buttons (P/R/O/Q) on the remote control.

• By enlarging the projected image using

or MAGNIFY, more fi ne adjustment can be performed.

Picker

•By continuing to press the adjustment buttons (P/R/O/Q), the picker moves rapidly.

After selecting the color of the projected
image to correct, press ENTER. The
C.M.S. color adjustment screen is	Useful Features
displayed. (Go to step 3.)

49