Sharp XG-SV100W, XG-SV200X appendix Attaching the Ceiling-mount Rotating Module AN-SV100T, Appendix

Attaching the Ceiling-mount Rotating Module (AN-SV100T)

1

2

3

4

Press STANDBY/ON on the projector or STANDBY on the remote control to put the projector into Standby mode. Then disconnect the power cord.

Turn over the projector and place it upside down on a flat surface. Remove the connector cover.

Place the ceiling-mount rotating module on the bottom of the projector so that it is aligned with the module installation holes on the projector. (Make sure the three position-setting pins on the module are inserted into the position-setting holes on the projector.)

Using the supplied bolts, attach the ceiling-mount rotating module to the projector.

First, lightly screw all four bolts and then tighten them firmly.

Appendix

77