Sharp XG-SV100W Using the Adjustment Feet, Press H&V SHIFT on the remote control, Basic Operation

1 Press H&V SHIFT on the remote control.

•Pressing ENTER on the projector or on the remote control displays the test pattern. Checking the test pattern is useful for more accurate adjustment.

ROn-screen display

	LENS SHIFT
END
LENS SHIFT
TESTPATTERN	LENS CENTER

2 Press P, R, O or Q on the

projector or the remote control to adjust the image position.

Note

•When RETURN is pressed, the lens shift reset screen is displayed. Lens shift can be reset to factory default with this screen.

ENTER button

Adjustment buttons (P/R/O/Q)

RETURN button H&V SHIFT button

Using the Adjustment Feet

•When the position of the projected image cannot be adjusted with the lens shift function, use the

adjustment feet to adjust the projected angle.

• The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector, the screen is inclined or when the installation site is slightly inclined.

• Install the projector so that it is as perpendicular to the screen as possible.

1 Rotate the adjustment feet to adjust the projected angle.

• The projector is adjustable up toAdjustment feet approximately 9 degrees (front) and

approximately ±2 degrees (rear) from the standard position.

Warning!

Down	Up
• Do not hold the lens and lens cover when	Up	Down
projector angle is adjusted.

•Use caution not to pinch your fi nger in the space between the adjustment foot and the projector when the projector angle is lowered.

Basic Operation

29