Sharp XG-SV100W, XG-SV200X appendix Rear View Terminals, Using the Kensington Lock, Introduction

1 2 3 4 5 6 7 8 9

10 11

Introduction

12

Rear View (Terminals)

1LAN terminal 26

Terminal for controlling the projector using a computer via network.

2USB terminal 42

Terminal connecting with the USB terminal on the computer for using the supplied remote control as the computer mouse.

3S-VIDEO input terminal 23

Terminal for connecting video equipment with an S-video terminal.

4AUDIO 2 input terminal 24

5AUDIO 1 input terminal 24

6COMPUTER/COMPONENT 1 input terminal 22, 23

Terminal for computer RGB and component signals.

7AUDIO OUT terminal 24

Audio output terminal of equipment connected to the audio input terminal.

8MONITOR OUT* terminal 24

(Output terminal for computer RGB and component signals)

Terminal for connecting a monitor.

COMPUTER/COMPONENT 2* input terminal 22, 23

Terminal for computer RGB and component signals.

* You must switch the setting depending on whether you are using the terminal for MONITOR OUT or COMPUTER/COMPONENT 2 input.

13 14 15 16 17

9HDMI terminal 22, 23 Terminal for HDMI input.

10RS-232C terminal 25

Terminal for controlling the projector using a computer.

11VIDEO input terminal 23

Terminal for connecting video equipment.

12Exhaust vent 69

13Rear adjustment foot 29

14Intake vent 69

15Kensington Security Standard connector

16Remote control sensor 15

17AC socket 26

Connect the supplied power cord.

Using the Kensington Lock

•This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector.

13