Sharp XG-SV200X, XG-SV100W appendix Attaching the Ceiling Mount to the Ceiling Continued

Attaching the Ceiling Mount to the Ceiling (Continued)

When installed with the

AN-TK202

1Attach the ceiling mount to the ceiling.

•First screw a bolt into the hole (smallest hole) and tighten it enough to keep the

mount in place. Then, do the same for the holes , and .

Position the four corners correctly, and then tighten all bolts fi rmly.

•Use M8-type bolts. (Bolt type may vary depending on the method of installation.)

•Use the washers supplied with the ceiling mount.

Caution

•Ask your dealer or service shop to install the ceiling mount. Sharp will assume no responsibility whatsoever if inadequate installation causes your projector or attached devices to fall out of place.

80