Sharp XG-SV200X Helpful Functions Set during Installation “PRJ” menu Continued, Keylock Function

Helpful Functions Set during Installation (“PRJ” menu) (Continued)

Menu operation n Page 46

5Enter the same keycode in “Re- confirm”.

Note

To cancel the keycode that you have already set

•Press R on the projector for four times in steps 4 and 5 above.

When the System Lock is set

•When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection.

Input screen for keycode

System Lock – – – –

Taking the Keylock Off

Hold down ENTER on the projector for about 5 seconds.

On-screen display

Info

•Even when Keylock function is set to “On”, STANDBY/ON on the projector can be used to turn on and off the power.

•Keylock cannot be set while the projector is: displaying the “Menu” screens, in Standby mode, warming up, changing input signals, operating the Auto Sync function, in Freeze mode or on the “System Lock” screen during warming up.

Keylock Function

Use this function to lock the operation buttons on the projector.

Locking the Operation Buttons

1 Hold down ENTER on the projector for about 5 seconds while the projector is being turned on.

• The Keylock function screen is displayed.

Use this function to lock the operation buttons on the projector.

(Except STANDBY/ON button)

Note: You can release the keylock by holding down ENTER on the projector for about 5 seconds.

Return

On

SEL./ADJ.	ENTER
RETURN	END

2 Select “On”, then press ENTER.

On-screen display

•The Keylock function does not affect the operation with the remote control buttons.

•You cannot use the Keylock function while the projector is warming up.

8DLP® LinkTM

See “Using 3D Viewing Mode” on page 67 for details.

9DLP® LinkTM Invert

See “Using 3D Viewing Mode” on page 67 for details.

58