Sharp XG-SV200X Connecting the Power Cord, Controlling the Projector by a Computer Continued

Controlling the Projector by a Computer (Continued)

When connecting to the LAN terminal using a LAN cable

LINK LED (green)

Illuminates when linked.

TX/RX LED (yellow)

Illuminates when transmitting/receiving data.

*To ensure safety, do not connect the LAN terminal with any cables that may cause excessive voltage such as a telephone line.

Hub

or

Computer

To LAN terminal

LAN cable (Category 5 type, commercially available)

Note

•When connecting to a hub, use a straight-through Category 5 (CAT.5) type cable (commercially available).

•When connecting to a computer, use a cross-over Category 5 (CAT.5) type cable (commercially available).

Connecting the Power Cord

Plug the supplied power cord into the AC socket on the rear of the projector. Then plug into AC outlet.

AC socket

Power cord (supplied)

To AC outlet

26