Black & Decker D1200, D1700, D1600, D1500 manual Care and Cleaning

D1600Pub1000003023 6/2/06 10:20 AM Page 6

F

Surge of Steam

•Horizontal

Smart Steam™ Technology

The Smart Steam™ system generates steam only at higher temperature settings (between 4 and 6) (F). Once you select the temperature, the Smart Steam™ technology detects the set temperature and adjusts the steam power accordingly. The higher the setting, the more powerful the steam.

Use to remove stubborn creases.

1.With the water tank filled to the MAX mark, set fabric-select dial to appropriate setting (between 4 and 6) for your fabric. Read garment's label to help you determine fabric type.

Note: Steam is automatically turned off between settings 1 and 3.

X

MA

G

•Vertical

2.Once you select the appropriate setting, wait for iron to beep and display READY.

3.Press the surge-of-steam button to generate a burst of steam

(G). For best performance,

leave an interval of 5 seconds between bursts.

Important: Always stand the iron on its heel rest when powered on but not in use.

Use for removing wrinkles from hanging clothes and drapes.

1.Be sure the water tank is filled to the MAX mark.

2.Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be steamed once they are hung.)

3.Set the fabric-select dial to appropriate setting (between 4 and 6) for your fabric.

M

A

X

AU

T

O

C

L

E

A

N

H

MAX

J

K

4.Wait for iron to beep and display READY.

5.Hold the iron close to, but not touching, the fabric.

6.Pull the fabric tight in your free hand and pump the

surge-of-steam button as you move the iron over the fabric (H).

Important: Always stand the iron on its heel rest when powered on but not in use.

Using Spray

Use to dampen tough wrinkles at any setting (J).

1.Be sure the iron is filled with water.

2.On first use, pump the spray button several times.

ANTI-DRIP SYSTEM

The anti-drip system prevents water spotting at low temperatures.

Dry Ironing

1.Turn the fabric-select dial to setting 1, 2, or 3 to iron without steam (K). The Smart Steam™ system will automatically turn off and there will not be any steam generated.

2.To dry iron at higher settings, empty the water from the reservoir to prevent steaming.

Emptying Water Tank (Optional)

Note: It is not necessary to empty the water after each use.

1. Unplug the iron and let it cool.

2. To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the water-fill hole (L).

L

Care and Cleaning

This product contains no user-serviceable parts. Refer service to qualified service personnel.

Cleaning Outside Surfaces

1.Make sure iron is unplugged and has cooled completely. Wipe the soleplate and outer surfaces with a soft cloth dampened with water. Add mild household detergent. Never use abrasives, heavy-duty cleansers, vinegar or scouring pads that may scratch

or discolor the iron.

2.After cleaning, steam iron over an old cloth to remove any residue from the steam vents.

Auto Cleaning

To keep the steam vents free of any buildup, about once a month follow these instructions.

1.Fill the water tank well below the MAX line. Plug in the iron.

2.Turn the fabric-select dial to 6 and stand the iron on its heel rest.

3.Wait for the iron to beep and READY to display on the digital window.

4.Unplug the iron and hold over a sink with the soleplate facing down.

M

5.Press and hold the AUTO CLEAN® button. Be careful, as hot water and steam will come out of the steam vents (M). Continue to hold the auto-clean button until all the water has emptied. If necessary, rock iron side to side and front to back.

6.When finished, release the button, stand the iron on its heel rest and plug it in. Heat for about 2 minutes to dry out any remaining water.

Storing your Iron

1.Unplug the iron and allow it to cool.

2.Store vertically on its heel to prevent water leaking from the soleplate. You can wrap the cord around the smart stand for

storage (N).

N

5 6