IRONING WITH STEAM
Smart Steam™ Technology
The Smart Steam™ system generates steam at higher temperature settings (between 5 and 7) (F). Once you select the temperature, the Smart Steam™ technology detects the set temperature and adjusts the steam power accordingly. The higher the setting, the more powerful the steam.
F
Surge of Steam
Use to remove stubborn creases.
1.With the water tank filled to the MAX mark, press appropriate fabric temperature selector pushbutton to select the setting (between 5 and 7) for your fabric. Read garment's label to help you determine fabric type.
X | AUTO CLEAN |
MA |
K
L
USING SPRAY
Use to dampen tough wrinkles at any setting (K). 1. Be sure the iron is filled with water.
2.On first use, pump the spray button 
several times.
IRONING WITHOUT STEAM
Note: You can use the Steam On/Off button to turn off the steam function in all settings
1.Select setting 1, 2, 3 or 4 to iron without steam (L). The Smart Steam™ system will automatically turn off and there will not be any steam generated.
2.To dry iron at higher settings, empty the water from the reservoir to prevent steaming.
3.Plug in the iron, wait until iron beeps and digital display shows selected setting. If the steam symbol is flashing, press the Steam On/Off button to turn off the steam function.
Note: Steam is automatically turned off between settings 1 and 4.
2.Once you select the appropriate fabric setting, wait for iron to beep and display selected setting.
Tip: The steam symbol becomes steady, indicating the steam function is off.
EMPYTING WATER TANK (OPTIONAL)
Note: It is not necessary to empty the water after each use.
G |
|
|
X | AUTO | CLEAN |
MA |
|
|
H |
|
|
3.Press the Steam On/Off button to turn on the steam function. The Steam symbol on the digital display flashes, indicating that steam function is ready (G).
4.Press the 
to generate a burst of steam
(H). For best performance, leave an interval of 5 seconds between bursts.
Important: Always stand the iron on its heel rest when powered on but not in use.
Vertical Steam
Use for removing wrinkles from hanging clothes and drapes.
M
30 seconds
N8 minutes
1.Unplug the iron and let it cool.
2.To release the water, hold the iron over a sink with the tip pointing down. Water will empty out of the
SPECIAL FEATURES
3-Way Automatic Shutoff
The automatic shutoff feature in your iron works as follows:
• The iron will shut off after 30 seconds of inactivity if left on its | |
soleplate or tipped over on its side. If left vertically on its heel | |
rest, it will shut off after 8 minutes of inactivity (N) . |
|
• The unit beeps once and the AUTO OFF symbol | flashes |
on the digital display to let you know the iron has stopped | |
heating (P). |
|
• After a few seconds, the digital display light goes off. |
|
1. | Make sure the water tank is filled to the MAX mark and iron is plugged into electrical |
| outlet. |
2. | Press Steam On/Off button to activate steam function. |
P
• If you pick up the iron, an internal |
is activated and the iron starts heating again. |
Tip: You might have to move the iron or shake it gently.
3. | Hang the garment to be steamed on a clothes hanger. (Curtains or drapes can be |
| steamed once they are hung.) |
4. | Press appropriate fabric temperature selector pushbutton to select appropriate setting |
| (between 5 and 7) for your fabric. |
•The unit beeps two times, the digital display light comes on and the set temperature is displayed again.
Note: Wait for iron to reheat completely before resuming operation.
Anti-Drip System
M
A
X
AU
T
O
C
L
E
A
N
J
5.Wait for iron to beep and digital display to show selected setting with a flashing steam symbol.
6.Hold the iron close to, but not touching, the fabric.
7.Pull the fabric tight in your free hand and pump the
steam button 
as you move the iron over the fabric (J).
Important: Always stand the iron on its heel rest when powered on but not in use.
The
5 | 6 |