How to Use, Symbols, Getting Started | Black & Decker D5000, D5500

Product may vary slightly from what is illustrated.

1.Spray nozzle

2.Water-fill cover

3.Steam On/Off button

4.Fabric temperature selector pushbuttons (+ and -)

5.Digital display

6.Steam button

7.Spray button

8.Comfort Grip™ handle

9.Heel rest

10.Water tank

11.AUTO CLEAN® button

12.Soleplate

Symbols

Surge-of-Steam

Spray

Auto Off

How to Use

This appliance is intended for household use only.

GETTING STARTED

Remove any labels, stickers or tags attached to the body or soleplate of the iron.

Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

Important: For optimum performance, let the iron stand for 90 seconds before beginning to iron.

Filling Water Tank

1. Grip each side of the water-fill cover and pull open (A).

2.Tilt the iron and using a clean measuring cup, pour water into opening until the water reaches the MAX level mark on the water tank (B). Do not overfill.

3. Close the water-fill cover.

Note: If you need to add water while ironing, unplug the iron and follow above steps.

B	4. Plug the iron into an electrical outlet.
	4. Plug the iron into an electrical outlet.
	•	The iron beeps.
	•	Digital display window illuminates and fabric setting
		1 (ACRYL) displays on the window with a flashing up arrow
		and a circle around the iron symbol (C).

5.Once the iron reaches the preset temperature, it beeps and the display shows the set temperature, fabric type and the iron symbol without the circle (D).

SELECTING FABRIC TEMPERATURE

	1. Read garment's label to help you determine fabric type.
D	Tip: If unsure of a garment's fiber, test a small area (on an inside
D	seam or hem) before ironing.

2.Once you determine the fabric type, select appropriate temperature setting (from 1 to 7).

	To set fabric temperature:
	1.	Use the pushbuttons on either side of the digital display
		window (E).
	2.	Press the (+) button to select a higher setting.
	3.	Press the (-) button to select a lower setting.
E	Tip: As a guide, the digital display shows the setting number with
E		the corresponding fabric type.
		the corresponding fabric type.

4.Once the iron reaches the selected temperature, it beeps and shows the selected temperature number with corresponding fabric type and the iron symbol.