How to Use

D2000.Pub178674RV06 1/17/06 3:29 PM Page 4

Product may vary slightly from what is illustrated.

This appliance is for houseold use only.

Before first use, remove any labels, stickers, or tags that may be attached to the body or soleplate of the iron.

1.	Spray nozzle	7.	Power indicator light
2.	Water-reservoir opening	8.	Heel rest
3.	Digital display window	9.	Water window with MAX mark
4.	Power/temperature setting button	10.	Variable steam dial
5.	Surge-of-steam button	Note: D2020 electric cord is 2 feet longer.
6.	Spray button

Models D2000 and D2020

1.Digital display window

2.Surge-of-steam button

3. Spray button

1.Using a clean measuring cup, tilt the iron and pour water into the water-fill opening until the level reaches the MAX mark on the water window (B). Do not overfill.

2.Note: Use ordinary tap water for ironing. Do not use water processed through a home softening system.

3.Plug in the iron. The light on the handle glows and a beep sounds. The digital display illuminates. Temperature setting 1 appears on the display.

4.To select a temperature setting from 1 to 7, press the temperature button located below the digital display until you reach the desired setting (C). The readout will display the setting number and an "up" arrow will flash until the iron has reached the correct temperature for that setting.

Note: There is a convenient fabric/temperature guide on the saddle of the iron (D).

•For steam ironing, be sure the water reservoir is filled, then turn the variable steam dial to the appropriate setting for the fabric you are ironing (E). For optimum performance at any steam setting, let the iron stand

on its heel rest until operating temperature is reached, as indicated on digital display (see fig. A), before beginning to iron. When finished ironing on any steam setting, turn the variable steam dial to "steam off" before unplugging the iron.

4. Power/temperature setting button

• For dry ironing, move the variable steam dial to the “steam off” setting.

5.When the correct temperature is reached the iron will beep twice and the arrow will disappear. The temperature setting number will continue to be displayed in the lighted area .

6.To change temperature settings while ironing, just push the temperature button. When a lower setting is selected, a "down" arrow will flash until the iron temperature has lowered to the correct level for that setting.

7.About the Auto Off: When the iron is idle for 10 minutes, the iron will beep one tone, the digital display will flash "Auto Off" and the iron will turn off.