USING THE
FABRIC STEAMER & IRON
STEAMING GARMENTS
1.Place garment on a clean,
2.Point Steam Nozzle at bottom of garment. Steam will rise along inside and outside of fabric, removing wrinkles. Slowly slide Steam Nozzle vertically, from bottom to top of garment.
NOTE: Do not allow kinks to form in hose at any time during use.
3.Direct Steam Nozzle away from garment and smooth fabric with your free hand.
4.Repeat steps 3 and 4 as necessary until fabric is smooth and wrinkle free.
USING THE IRONING PLATE
Whenever a crisp crease is desired, this can be easily accomplished using the Ironing Plate. A folded towel placed on a
1.Be sure Fabric Brush has been removed before proceeding.
CAUTION: Use care when removing Fabric Brush from Ironing Plate, as both may be hot and may cause burns or other injury.
2.If the unit has not recently been in use, allow Ironing Plate at least 45 seconds to heat up.
3.To form a crease, fold fabric and apply Iron Plate as you would use a regular iron. If a steam burst is desired, simply press Steam Button.
When you are finished using the Fabric Steamer & Iron, immediately set Lighted On/Off switch to “Off”position and unplug power cord from electrical outlet. Refer to Care and Storage Guidelines on page 13 of this manual for proper cleaning and storage procedures.
FABRIC STEAMER & IRON
PRODUCT INFORMATION
The following features and accessories are included with your Fabric Steamer & Iron. Carefully inspect Styrofoam packing material for all parts listed below. To obtain possible missing parts, refer to the Customer Support section on page 14 of this manual.
UNIT FEATURES & ACCESSORIES
1.
2.BASE UNIT
3.WATER RESERVOIR FILL HOLE
4.WATER RESERVOIR CAP
5.WATER LEVEL WINDOWS
6.LIGHTED ON/OFF SWITCH
7.STEAM NOZZLE HANGER
8.STEAM NOZZLE
9.HEATING INDICATOR LIGHT
10.STEAM BUTTON
11.HANDLE
12.IRONING PLATE
13.STEAM HOSE
14.FABRIC BRUSH
15.MEASURING CUP
12 | Top Innovations, Inc. | Top Innovations, Inc. | 5 |