FABRIC STEAMER & IRON
PRODUCT INFORMATION
•The
•The Base Unit (2) is the main body of the
•The Water Reservoir Inlet (3) serves as the opening through which water is poured into the water reservoir. The Water Reservoir Cap must be removed in order to access the Inlet.
•The Water Reservoir Cap (4) covers the Water Reservoir Inlet, keeping water contained safely inside the water reservoir.
•The Water Level Windows (5) provide a convenient view into the water reservoir, allowing the remaining water level to be easily monitored.
•The Lighted On/Off switch (6) activates and deactivates the unit, and provides a clear visual indication of whether or not the unit is powered on.
•The Steam Nozzle Hanger (7) provides a safe and convenient place to hang the Steam Nozzle when not in use.
•The Steam Nozzle (8) emits a flow of hot, penetrating steam when the Steam Button is pressed.
•The Heating Indicator Light (9) illuminates when the unit is turned on, indicating that the heater is active. The Light will deactivate once the Ironing Plate is heated, then cycle on and off during use as the unit works to maintain a constant temperature.
•The Steam Button (10) is pressed in order to control the flow of steam from the Steam Nozzle.
•The Handle (11) is designed to stay relatively cool while providing the optimum level of safety and user comfort.
•The Ironing Plate (12) functions similar to a conventional iron, and is designed for making crisp creases.
•The Steam Hose (13) carries water from the water reservoir in the Base Unit to the boiler in the Steam Nozzle for conversion into steam.
•The Fabric Brush (14) connects to the Steam Nozzle, above the Ironing Plate, and is designed to work with steam in order to remove lint and gently smooth stubborn wrinkles.
•The Measuring Cup (15) assists you in easily and consistently filling the water reservoir with the optimum amount of water (32 oz. / 950 ml.)
USING THE
FABRIC STEAMER & IRON
STEAMING LINENS & FABRICS
NOTE: Be sure that water reservoir has already been filled and, if desired, the Fabric Brush is connected before following these steps.
1.For
CAUTION: This unit uses a grounded
2.Set Lighted On/Off Switch to “On” position, and verify that switch is illuminated. The Heating Indicator Light will illuminate, indicating that the heater is active.
3.After approximately
NOTE: During use, Heating Indicator Light may cycle on and off. This is normal, as the unit works to maintain a constant, appropriate temperature.
4.Point Steam Nozzle at material you wish to steam, then press and hold Steam Button. After a few seconds, Steam Nozzle will begin producing a flow of steam.
CAUTION: Always be sure that Steam Nozzle is pointed in a safe direction (away from yourself, other people, pets and plants) before pressing Steam Button.
NOTE: When unit is first turned on, Steam Button must be held for approximately 10 seconds before steam flow will begin. This is because water must be pumped from water reservoir into Steam Nozzle. After this, steam flow will be near instantaneous when Button is pressed.
5.Keep the flow of steam focused on material you are steaming. Using a slight
GENERAL STEAMING TIPS
•Curtains and draperies may be steamed while still hanging.
•To remove wrinkles from towels, handkerchiefs and napkins, drape them over a rod or towel rack and gently steam them.
•Heavier fabrics may require repeated steaming to effectively remove wrinkles.
•To remove exceptionally stubborn wrinkles steam both sides of fabric.
•For additional assistance in removing tough wrinkles, or to remove lint and other particles, attach Fabric Brush to Steam Nozzle (see Connecting the Fabric Brush section on page 9 of this manual).
6 | Top Innovations, Inc. | Top Innovations, Inc. | 11 |