Attaching the Loader to Your Tractor

1.Position the tractor as centrally as possible and drive, using lowest gear possible, into the loader frame until hoses can be connected.

2.Couple up the hydraulic hose lines to the loader or tractor valve ensuring proper function (see Operator and Maintenance Section)

NOTE: When mounting the loader for the first time, slowly work the cylinders back and forth, so that most of the air is removed. Loosen the bolts on the hooks so that they can be moved. Also, check that the nuts in the rear of the subframes are in line with the holes.

3.On some tractors, the lift cylinders may have to be extended slightly, so that the subframes can clear the front axle. Do not extend the cylinders more than is required.

4.Drive the tractor ahead until the subframe is past the front axle and the front hook is close to mounting boss.

WARNING! Check front grill clearance during installation to avoid tractor damage.

5.Retract or extend the lift cylinders to line up the front hook with the mounting boss.