Spin Speed Selection and Anti-Crease, Spin speed

Spin Speed Selection and Anti-Crease

You should first select the wash programme and then select the wash options (Changing the programme cancels the preset selected options).

Each selected programme has its own preset spin speed.

Spin speed

•You can reduce the spin speed or remove it completely by pressing the spin button (Figure 20).

•The spin speed will gradually reduce each time the spin button is pressed at 100 r.p.m. intervals to a minimum of 400 r.p.m (Figure 21).

No spin

•Press the spin button again to get to the no spin option and the display will show “0” (Figure 22).

•A programme without a final spin is used to prevent creasing when washing special fabrics.

Anti-crease option

•Pressing the spin button again will select the anti-crease option (Figure 23).

•The wash programme stops on the last rinse, with the clothes left in water.

•When the option is deactivated, the washing machine continues the programme, draining and spin-drying.

•It is used, for example, when you are not at home and want to delay the spin drying until you get home, to prevent the clothes creasing after spin- drying and being left in the drum to be removed.

For added safety, the porthole door does not open immediately at the end of programme. There is a time delay of approximately two minutes before you can open the door.

SPIN

fig. 20

SPIN

fig. 21

SPIN

fig. 22

SPIN

fig. 23