CDA CI240 manual Before First Use

Page 9

Before First Use

•When your washing machine has been correctly installed, we recommend that you pre-clean the machine.

This is to check that the installation, the connections and the drainage are all correct, and to thoroughly clean the inside of the washing machine before any wash programmes are run (see the operating instructions on the following pages).

•Prior to pre-cleaning you should ensure the transit bolts have been removed.

•Select the normal programme at 60ºC (Figure 9).

•Press the Start/Pause button (Figure 9).

fig. 9

7

Image 9

Contents CI240 Integrated Washing Machine Contents CE Declarations of Conformity Appliance informationAccessories Washing Machine SpecificationsRemoving the Transit Bolts Unpacking the Washing MachineDrainage Connection Connecting to the Mains Water SupplyElectrical Connection LevellingElectrical information Before First Use Preparing Garments for Washing Sorting the ClothesPreparation Eco Note Detergents and AdditivesSelecting the Wash Programme There are four types of programme Programme Washing Machine ProgrammesMax Wash Programme Spin speed Spin Speed Selection and Anti-CreaseNo spin Anti-crease optionTime Delay Lock Function Starting UpWash Programme Phases and Power Cuts Power CutsProgramme Phases Cleaning the Detergent Dispenser MaintenanceCleaning the Outside of the Washing Machine Cleaning the FilterProblems Safety and TroubleshootingWhy won’t the washing machine start? Why doesn’t the washing machine take in water?Why doesn’t the washing machine spin-dry? Why doesn’t the washing machine drain or spin-dry?Why can’t I see any water in the drum during the wash? Why is there still some water in the dispenser?Customer Care Department 01949 862