Time Delay

Time delay selection button

•A delay of up to 24 hours can be selected. The delay must be selected after choosing the wash programme.

•To select the hours of delay, press the time delay button (Figure 24). Each time the button is pressed the delayed start of washing is increased by one hour.

Cancelling the delay

•To cancel the delay, press the time delay button repeatedly to cycle through the full 24-hours, and then press again.

•The delay will be cancelled when 24 hours have been reached and the button is pressed once more. If the programme is changed the delay is also cancelled.

Additional functions

Additional function selection button depending on programmes.

•There are 3 options: easy iron, extra rinse and intensive wash.

•Press the button and the desired option will be displayed (Figure 25).

•By pressing the button several times you can choose between several combinations of one, two and up to three additional functions at the same time depending on the programme selected (Figure 26).

Option 1: Easy-iron

This option prevents garments from creasing by means of carrying out a special programme with special turns to fluff out the garments after spin-drying and make them easier to iron.

Option 2: Extra rinse

Increases the level of the final rinse obtained in the clothes; suitable for large loads and garments belonging to people with sensitive skin. However, this option will increase your water consumption.

Option 3: Intensive wash

This option, specially recommended for heavily soiled or stained clothes, achieves better results by extending the normal wash cycle.

If during the additional function selection, the programme is changed or the Start/Stop button is pressed, all the functions selected until then are cancelled.

		EASY IRON
		EXTRA RINSE
		Select
SPIN	DELAY TIME	SELECTION

fig. 24

Select

fig. 25

Select

fig. 26