Safety and Troubleshooting
•If you detect any problems with your washing machine, you will probably be able to rectify them yourself by consulting the following instructions.
•If this is not the case, unplug the appliance and contact the technical assistance number.
Do not open up the washing machine. It does not contain any fuses or similar components than can be replaced.
Indicator | Problems |
F01 | No water coming in |
F02 | Does not drain or |
C03 | Does not |
F04 | Does not start |
F05 - F10 | Call the Technical Assistance Team |
Problems
Why won’t the washing machine start?
This may be due to the following:
•Check the door is properly shut.
•The washing machine is not plugged into the mains or there is no voltage in the mains supply.
•The Start/Pause button has not been pressed.
•If the washing machine door is not properly shut, F04 will appear on the display.
Why is the washing machine vibrating or making too much noise?
This may be due to the following:
•The blocking and transport screws have not been removed.
•The washing machine has not been correctly levelled.
•On
Why doesn’t the washing machine take in water?
•If F01 shows on the display this may be caused by a cut in the water supply, a tap turned off or a blocked water inlet filter.
•The possible solutions are as follows: wait for the water supply to be reconnected, turn on the tap, or remove the water inlet hose and clean the filter.
20