Starting Up
Start/Pause button
•To start up the washing machine you have to press the Start/Pause button (Figure 27).
•The time remaining (in minutes) until the end of the programme will appear on the display at all times.
Lock Function
Lock function selection
•The lock function ensures that the programme will not be affected if any buttons are pressed. It is used when children could press the buttons, etc.
•The lock function should be activated after the wash programme has been selected together with all its options.
Activating the lock function 
•The lock function is activated by pressing the Start/Pause button and holding it down for at least 3 seconds (Figure 28).
•The display will show the lock symbol if it is activated.
Deactivating the lock function
•The lock function is cancelled when the wash programme comes to an end (Figure 29).
•If you want to deactivate the lock function before the end of the programme, you have to hold the Start/Pause button down again for at least 3 seconds.
•After 3 seconds, the lock function indicator will disappear from the display, and it will go into pause status.
•The Start/Pause button does not cancel the lock function.
fig. 27
fig. 28
fig. 29
16