CDA C1370 Powder Detergent Doses, Liquid Detergent Doses, Descalers, Programmes and Functions

Page 13

EN

4.6 POWDER DETERGENT DOSES

Laundry with normal dirt

1.Choose a programme without prewash.

2.Pour the total amount of detergent shown on the pack into the main wash compartment of the detergent dra- wer.

Very dirty laundry

1.Choose a programme with prewash.

2.Place ¼ of the recommended amount of detergent in the prewash compartment of the detergent drawer and ¾ of the detergent in the wash compartment.

Warning!

If no recommended doses are provided, for delicate items in synthetic fibre use from ½ to 2/3 of the recom- mended dose for washing tough cotton fabrics.

Only neutral detergents recommended for wool should be used on the wool programme.

Use the doses recommended by the detergent producer.

4.7 LIQUID DETERGENT DOSES

1.Pour the dose required into the measuring cap supplied with the bottle of liquid detergent and place it in the drum, or use the main wash compartment of the detergent drawer, fitting the insert provided.

2.The scale on the red insert is intended as an aid when deciding the dose of liquid detergent.

Warning!

Liquid detergents can be used, at the doses recommended by the producer, only for the main wash, i.e. in all programmes without prewash.

4.8 DESCALERS

Descalers can be added to the prewash and main wash compartments as recommended by their producers. Place the detergent in the compartments first, followed by the descaler.

4.9 PROGRAMMES AND FUNCTIONS

For advice on selecting programmes in relation to the type of fabric, refer to the "Programmes Table", supplied with this manual.

4.10 SWITCHING ON THE APPLIANCE AND SELECTING THE WASHING PROGRAMME

To switch on the appliance and select the programme, proceed as follows:

1.Turn the programmes knob in either direction. This switches on the washing machine.

2.Select the washing programme. The time left to the end of the programme and the maximum recommended weight for the selected programme alternate on the display. The symbols on the display light up to identify the information shown.

3.The default spin speed values are shown. The initial settings can be modified using the button underneath the sequence of spin speeds.

4.If spin speed is set, there will be no spin cycle and the appliance will stop with the tank full. If this value is set the appliance does not perform the final spin and the washing programme ends with water in the tank.

Delay Timer

Max recommended weight

Spin Speed selection

11

Image 13
Contents CI370 High Capacity Washing Machine 7kg 1400 spin Washing Machine Contents Read the Instructions Precautions for Safety and USEPage = brown N = blue = yellow-green Unpacking Installation InstructionsPositioning and Levelling Connecting to the Drain Connecting to the Water SupplyElectrical Connection Control Panel Description of ControlsPreparing the Items for Washing Using the Appliance for WashingOpening the Door Loads of WashingAdding Detergent and Additive Loading the Items for WashingLiquid Detergent Doses Powder Detergent DosesDescalers Programmes and FunctionsSelecting and Confirming Options OptionsStarting the Washing Programme Time RemainingInterrupting or Changing the Washing Programme Child Lock Programme ENDOpening the Appliance in AN Emergency Cleaning the Outside of the Appliance Cleaning and MaintenanceCleaning the Drum Cleaning the Door GasketCleaning the Water Intake Filters Cleaning the Detergent DrawerTroubleshooting Error Display Program Guide