Error Display

11Appliance does not spin Anti-imbalance safety device tripped because laundry not evenly distrib- uted in drum. If laundry is still wet at end of cycle, rearrange it in the drum by hand and repeat spin programme only.

12Emptying water from drum In the event of a power blackout or appliance failure, the water can be removed from the drum using the emergency procedure.

13Laundry not properly spun Large items screwed up and not evenly distributed within drum. Always wash a mix of large and small items.

14	Traces	of detergent on	Many phosphate-free detergents contain substances with low water solu-
	laundry		bility.
			Select Rinse programme or brush the laundry.
15	Washing	results unsatis-	-	Probably too little detergent or unsuitable detergent used
	factory		-	Difficult stains not dealt with before washing
			-	Difficult stains not dealt with before washing
			-	Correct temperature not set
			-	Basket overloaded.

In case of a malfunction, the appliance will identify the problem by showing an error code on the display.

Error code

Key to problem

Door not properly closed. Try reclosing.

Aqua stop device tripped. Cut off power supply, turn off water tap and contact nearest service centre.

Water not taken in for washing. See point 2 in troubleshooting table.

Water not pumped out. See point 4 in troubleshooting table.

For all the other error codes displayed, cut off the electricity supply, turn off the water tap and contact your nearest Service Centre.

CDA C1370 manual Error Display

ERROR DISPLAY