EN
For Great Britain only
Warning: this appliance must be earthed.
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:
1.Remove the fuse cover (A) and fuse (B)
2.Fit replacement 13A fuse into fuse cover
3.Refit both into plug
Important:
The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.
Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug.
Replacement fuse covers are available from your local electrical store.
If the appliance is provided with a plugless supply cord:
•It is necessary to install in the fixed wiring an
•The connection to the mains must be carried out by a qualified technician in accordance to the scheme shown below and the regulations in force
L = brown N = blue
= yellow-green
•In the event of damage to the supply cord, it has to be replaced by the manufacturer or an au- thorized technical service center in order to avoid any risk.
Important!
This appliance is easy to use.
However, for the best results it is important to read this manual carefully and follow all the instructions before putting it into operation.
The manual provides the correct instructions for installation, use and maintenance, as well as giving useful advice.
The manufacturer declines all responsibility for injury or damage caused by failure to comply with the above regulations or deriving from tampering with even just one part of the appliance and the use of
4