W6021 OPERATING INSTRUCTIONS
WARNING! To reduce the risk of electric shock or injury to persons, read the ”Important Safety
Instructions” section on page 2 before operating this appliance.
THE CONTROL PANEL
Door Open Button
Press to open the glass door. (Please note that the unit must be at the end of a program to open the glass door.)
Start
Stop
Power Indicator Light
Glows when the power is turned on.
Power Button
Press to turn on power to the machine.
Program Control
Temperature Control |
| Turn to select a program. (Please | ||||
Turn clockwise to select the |
| note that the dial does not move as | ||||
wash temperature. |
| the program advances.) | ||||
Temperature °F | Programs | |||||
205 |
| Drain |
|
|
| Stain |
|
|
|
| |||
85 |
|
|
| Heavy | ||
|
| Spin |
|
|
| |
175 |
| 105 Rinse |
|
|
| Normal |
|
| Hand/ |
|
|
| Perma |
160 |
| 120 Delicate |
|
|
| press |
|
| Wool |
|
|
| Quick |
| 140 |
|
|
| Super quick |
Start/Stop Button
Press to start or stop/ interrupt a program.
Super Rinse Button
Press to program seven rinses.
No Spin/No Drain
Press to omit the spin and final drain cycles.
800 RPM Spin Button
Press to reduce spin speed from 1200 rpm to 800 rpm.
POWER BUTTON
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the door, set the programs or start the machine.
START/STOP BUTTON
Once you’ve selected the program and options, press this button to start the washer.
To stop the washer during a program, press and hold this button down until the unit stops (about 3 seconds).
DOOR OPEN BUTTON
When the washer has completed a program, press this button to open the door. Note that the power must be on and the unit must be at the end of a program and the water drained before the door will open.
NOTE: For instructions on how to open the door manually in case of power failure, see page 24.
OPTION BUTTONS
Super Rinse
Press this button to add two rinses. Press the button again to turn this option off. (This option cannot be cancelled after the main wash water has pumped out.) This option is recommended for persons with sensitive skin or allergies.
No Spin/No Drain
Press this button to omit the spin cycles in all programs along with the final drain. If you select this option, the unit will stop with water in the drum, so you will have to run the Drain program before you can open the door.
800 RPM
Press this button to reduce the spin speed from 1200 rpm to 800 rpm. This option is for delicate fabrics that should not be spun at high speeds. Note: This option does not apply to the Rinse and Spin programs.)
PROGRAM CONTROL KNOB
Turn this knob to the desired program. The table on the following page defines each program.
TEMPERATURE CONTROL KNOB
Turn this knob clockwise to the desired wash temperature. Always refer to the garments’ care labels for recommended wash temeratures.
Please note that the wash temperature for the Wool Wash and Hand Wash/Delicate programs will not heat higher than 105° F.
CANCELLING A PROGRAM
To cancel a program after it has started, press and hold the Start/Stop button until the unit stops. If there is water in the unit, you will have to turn the Program Control knob to Drain then press Start. The water will drain and the unit will stop in 30 to 45 seconds. You can then open the door.
Page 10