W6761 OPERATING INSTRUCTIONS
WARNING! To reduce the risk of electric shock or injury to persons, read the ”Important Safety
Instructions” section on page 2 before operating this appliance.
THE CONTROL PANEL
Model W6761 has ASKO’s
buttons then press Start. Refer to “Preset Programs” on the next page for a definition of these programs.
Preset Programs | LCD Window |
Power Button
Press to turn on power to the machine.
Power Indicator
Light
Glows when the power is turned on.
Start/Stop Button
Press to start or stop/ interrupt a program.
Press one of these buttons to | Displays the wash program, spin speed, |
select a program. | temperature settings, and program run time. |
P1 P2 P3 P4
Start
Stop
MenuEnter
Program Selection Controls 
Door Open Button | These buttons allow you to customize the preset program settings, | |
such as wash temperatures, spin speed, rinses, display language, | ||
Press to open the glass door. | ||
etc. Refer to pages | ||
|
POWER BUTTON 
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be on before you can open the glass door, set the programs or start the machine.
START/STOP BUTTON 
Once you’ve selected a program and options, press this button to start the washer. You also press this button to stop the washer during a program.
NOTE: For instructions on how to open the door manually in case of power failure, see page 24.
INTERRUPTING OR CANCELLING A PROGRAM
To interrupt a program to add an item to the wash, press and hold the Door Open button until the unit stops (about 3 seconds). The machine will stop and the water will be pumped out before the door will open. Add the item to be washed and, if necessary, add more detergent. When you close the door, the unit will start at the point it was interrupted.
DOOR OPEN BUTTON 
When the washer has completed a program, press this button to open the glass door. Note that the power must be on and the unit must be at the end of a program and the water drained before the door will open.
To cancel a program, press and hold the Start/Stop button until the unit stops (about 3 seconds). Press Door Open. If there is water in the unit, it will drain before the door will open. If you stop a program this way, you will have to reselect a program and press Start/Stop to restart the machine. The program will start from the beginning.
UNDERSTANDING THE LCD WINDOW
The LCD window is easy to read and understand. It displays the wash program selection along with the wash temperature, spin speed, and program run time. The illustration below explains each item on the LCD window.
Program
Door Open | Temperature |
|
Displays when you press the | Wash temperature for the selected | |
Door Open button. | program. | rpm |
|
| |
When you press the Power button, the display toggles between the program numbers and the wash program names, (e.g., Normal, Super quick, etc.)
Preset Programs
P1 | Light wash | rpm |
P2 | Light wash | 1400 |
P3 | Quick wash |
|
P4 | Hand wash |
|
P1 P2 P3 P4 Start | Stop 105˚ 43 | |
Start
Spin speed for the selected program.
Program Time
When you start a program, the total time the program runs is displayed. As the program progresses, the time remaining displays. The program time toggles between the hours (e.g., 1h) and the minutes (e.g., 22).
Displays the program that is selected/running.
Indicates that you pressed Start and | Stop |
the program is running. | Indicates that the program has ended or |
| that you pressed Stop. |
Page 15