The table below lists the options available with each wash program. These options can be temporary or permanent, depending on your preference. Refer to the “Programming Instructions” section below for detailed instructions on how to navigate the program menu and make temporary and permanent changes to the programs.
OPTIONS AVAILABLE WITH EACH WASH PROGRAM
|
|
|
|
| OPTIONS (On/Off) |
|
| |
| Temp (1) (2) | Spin (3) |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Wash | Setting | Speed | Delayed | Pre- | E2:Eco | Super | Anti- | High |
Programs | (° F) | (rpm) | Start (hrs) | Soak | Efficiency | Rinse | Crease | Water |
|
|
|
|
|
|
|
|
|
Heavy | Cold, | yes | yes | yes | yes | yes | ||
|
|
|
|
|
|
|
|
|
Normal | Cold, | yes | yes | yes | yes | yes | ||
|
|
|
|
|
|
|
|
|
Light | Cold, | yes | yes | yes | yes | yes | ||
|
|
|
|
|
|
|
|
|
Synthetic | Cold, | yes | no | yes | yes | yes | ||
|
|
|
|
|
|
|
|
|
Quick | Cold, | yes | no | yes | yes | yes | ||
Super quick | Cold, | yes | no | yes | yes | yes | ||
|
|
|
|
|
|
|
|
|
Wool | Cold, | yes | no | yes | yes | no | ||
|
|
|
|
|
|
|
|
|
Hand wash | Cold, | yes | no | yes | yes | no | ||
|
|
|
|
|
|
|
|
|
NOTES: (1) Program times will increase when you select higher wash temperatures.
(2)Some fabrics may not be able to withstand extremely hot temperatures. Always refer to the garment care label for recommended wash temperatures.
(3)You can also select a No Spin or No Spin/No Drain option. (See “Spin Speed” on page 18.)
PROGRAMMING INSTRUCTIONS
Below are the basic instructions for changing a preset wash program. The following sections explain the menus and how to navigate them. You can make temporary
1.Press the button for the preset program you want to change
2.Press MENU until the menu you want to change displays (e.g., programs, temperature, etc.).
3.Press 
to scroll through the available options or to toggle between off and on.
P1 P2 P3 P4
Start
Stop
MenuEnter
4.Press ENTER to save your setting and return to the Main Program screen. The LCD will display the new setting.
5.If you only want to use this setting temporarily (for this one load), press START. When the program ends it will revert back to the previous setting.
6.If you want to save this setting permanently, press ENTER again then press START. The program will retain the change.
See “Navigating the Menus” on pages 18 and 19 for detailed instructions on creating customized programs.
Page 17