Remove the Shipping Bolts, Location, Levelling

NA	Remove the Shipping Bolts
NA
	IMPORTANT:
	IMPORTANT:
		Read these instructions to remove
		Read these instructions to remove
		the 4 shipping bolts (see
		Description for location). Situated
		on one either side of the rear
		panel, All shipping bolts MUST
		be removed before use.
		! Failure to do so may cause
		damage to your machine.
		It is important the transit bolt and
		spacer (see pic) come out intact.

1. Unscrew the bolt using a 13 mm wrench.

Location

Where you install your machine will affect its performance:

!For your safety and to comply with electrical regulations, seek professional advice if you want to install your machine in a bath or shower room.

•Make sure that the electrical socket and water taps are easily accessible. You should switch off the machine's electrical and water supplies when you are not using it for extended periods.

•Make sure that you allow enough space for the machine. Select a space at least 23.6” (60 cm) wide, 23.6” (60 cm) deep and 33.4” (85 cm) high. Also leave enough space to open the door fully, so that you can load and unload it easily.

•Where possible, the machine should be positioned on a solid floor to minimise vibration.

Take care when you move the machine not to rip any floor coverings. The weight of the machine may cause indentations in some floor coverings.

Levelling

2.STOP when 3 threads can be seen.

3. Hold, slide sideways and pull to remove.

4.For safety, close the

holes left by removing the bolts.

!Packaging materials are

not children's toys.

Did you know?

Your machine will be noisy if the two front feet are not adjusted so that the machine stands firm and level.

!The machine should be levelled from side to side and from front to back.

1.Move your machine into its final location. - Take care not to trap or kink the hoses.

2.Turn one or both front feet counter-clockwise by hand until the feet cannot be turned any more.

When adjusting the feet, use a spirit level to check the machine stands level, from side to side and from front to back.

If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (see figure); the angle of inclination, measured according to the worktop, must not exceed 2°.

The spring on each foot will stop them coming loose.

!If it is placed on a fitted or loose carpet, adjust the feet in such a way as to allow enough room for ventilation beneath the machine.

•…the shipping bolts are fitted to ensure that your machine is undamaged during delivery.

•...both of the shipping bolts must be removed before using the machine, not doing so will lead to excessive vibration, movement of the machine and could eventually lead to internal damage.

•...the majority of problems with noisy machines are due to the shipping bolts not being removed, closely followed by the feet not being adjusted correctly to level the machine.

•...you will be charged for a service engineers visit if a problem with your machine is caused by incorrect installation or misuse.

6	www.aristonappliances.us

AW 125 specifications

The Ariston AW 125 is a highly regarded washing machine that combines efficiency, performance, and user-friendly features, making it a popular choice for households. This model stands out for its thoughtful design and advanced technologies that cater to diverse laundry needs.

At the core of the Ariston AW 125 is its impressive load capacity of 7 kg, allowing users to wash ample laundry in a single cycle. This makes it particularly suitable for medium-sized families or those who prefer larger laundry loads. The maximum spin speed of 1200 rpm ensures that clothes come out drier after washing, reducing drying time significantly and promoting energy savings.

One of the defining features of the Ariston AW 125 is its energy efficiency. With an A+++ energy rating, this washing machine helps users save on electricity bills while minimizing their environmental impact. This energy-efficient design is complemented by multiple wash programs tailored for different fabric types and soil levels. Whether washing delicate garments, heavily soiled items, or everyday fabrics, users will find an appropriate cycle that offers optimal care and cleaning.

Additionally, the Ariston AW 125 incorporates advanced technologies such as the Smart Sensor system, which detects the weight of the wash load and adjusts the water and energy consumption accordingly. This intelligent feature not only enhances the washing process but also ensures that resources are utilized efficiently.

Another noteworthy characteristic of this model is its user-friendly control panel, which features a digital display for easy navigation. Users can select their desired wash cycle, spin speed, and temperature with minimal effort. The delay start function is another convenience, allowing users to program the machine to start at a later time, thus accommodating busy schedules.

In terms of durability and build quality, the Ariston AW 125 is designed to withstand the rigors of regular use, with high-quality materials and components that ensure longevity. The quiet operation, coupled with anti-vibration technology, provides a serene washing experience.

In summary, the Ariston AW 125 washing machine impresses with its combination of capacity, energy efficiency, diverse wash programs, and modern technology. It is an excellent investment for households looking for reliable and effective laundry solutions.