AEG L 98485 FL, L 98685 FL user manual Starting a Programme, AT the END of Programme

Page 21

Before you touch button 6 to start the appliance, you can can- cel or change the set of the de- lay start.

ENGLISH 21

You cannot set the delay start with the Steam programme.

STARTING A PROGRAMME

1.Touch button 6 to start the pro-

gramme. The indicator of button 6 stops to flash and is on with red col- our.

If a delayed start is set, the appliance starts the countdown.

The appliance adjust automat- ically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum neces- sary time. After approximately 15 minutes from the start of the programme, the display shows the new time value.

INTERRUPT A PROGRAMME

1.Touch button 6 . The indicator flashes.

2.Touch button 6 again. The wash- ing programme continues.

CANCEL A PROGRAMME

1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.

2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

CHANGE A FUNCTION

You can change only some functions before they operate.

AT THE END OF PROGRAMME

1.Touch button 6 . The indicator flashes.

2.Change the function set.

3.Touch button 6 again. The wash- ing programme continues.

OPEN THE DOOR

While a programme or the delay start operates, the appliance door is locked.

To open the appliance door:

1.Touch button 6 . The door lock symbol in the display goes off and a message tells you that the door is unlocked.

2.Open the appliance door.

3.Close the appliance door and touch

button 6 again. The programme or the delay start continues.

If the temperature and the level of the water is too high, the door lock symbol stays on. You cannot open the door. If neces- sary, do the following procedure to open the door:

1.Deactivate the appliance.

2.Wait for some minutes.

3.Make sure that no water is in the drum.

If you deactivate the appliance, it is necessary to set the pro- gramme again.

1.The appliance stops automatically.

2.The acoustic signals operate, if it is active.

3.In the display goes on and the message tells you that the pro- gramme is completed.

Image 21
Contents FL L 98485 FL Service ContentsAccessories and Consumables For Perfect ResultsVisit OUR Website for Child Safety Device Safety InformationGeneral Safety Care and CleaningDiscard the Appliance InstallationTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description Interior AccessoriesTouch Screen Control PanelAuto OFF Button Programme KnobDisplay Shortened duration Memory Buttons Dampf ButtonSTART/PAUSE Button Zeitvorwahl ButtonAcoustic Signals Function Temperature ButtonVorwäsche EinweichenWashing Programmes Sche LEN7 Steam Programmes Consumption ValuesLanguage Setting Clock SettingBefore First USE Using the Appliance Activating the Appliance and Setting a ProgrammeLoading the Laundry Using the Detergent and Additives Check the position of the flap SET the Delay StartAT the END of Programme Starting a ProgrammeHelpful Hints and Tips Laundry LoadStubborn Stains External Cleaning Care and CleaningMaintenance Wash Detergents and Additives Water HardnessDoor Seal DrumDetergent Dispenser Drain Pump Inlet Hose Filter and the Valve Filter Emergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingProblem Without Alarm Message To deactivate Unpacking InstallationPull out the plastic spacers Positioning and Levelling Water Drainage Inlet HoseEnglish Page English Page English 132940553-A-112011