AEG L 98485 FL, L 98685 FL user manual Installation, Discard the Appliance

Page 5

WARNING!

Do not look directly into the beam of the lamp.

To replace the internal lamp, contact the service centre. Disconnect the mains plug from the mains socket before the re- placement of the internal lamp.

INSTALLATION

The appliance is heavy, be careful when you move it.

Do not transport your appliance with- out the transit bolts, you can damage internal components and cause leak- ages or malfunctions.

Do not install and connect a dam- aged appliance.

Make sure to remove all packaging and transport bolts.

Make sure that the mains plug is dis- connected from the mains socket during installation.

Only a qualified person must do the electrical installation, the plumbing and the installation of the appliance. This to prevent the risks of structural damage or injury.

Do not install or use the appliance where the temperature is less than 0 °C.

When you install the appliance on a carpet floor, make sure that there is air circulation between the appliance and the carpet. Adjust the feet to have the necessary space between the appliance and the carpet.

Water connection

Do not connect the appliance with old hoses already used. Only use new hoses.

Make sure not to cause damage to the water hoses.

ENGLISH 5

Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some mi- nutes, then connect the inlet hose.

The first time you use the appliance, make sure that the water hoses and the couplings do not have leakages.

Electrical connection

Make sure that the appliance is earthed.

Make sure that the electrical informa- tion on the rating plate agrees with the power supply.

Always use a correctly installed shockproof socket.

Do not use multiple plugs and exten- sion cables. There is a risk of fire.

Do not replace or change the mains cable. Contact the service centre.

Make sure not to cause damage to the mains plug and cable.

Connect the mains plug to the mains socket only at the end of the installa- tion. Make sure that there is access to the mains plug after the installa- tion.

Do not pull the mains cable to dis- connect the appliance. Always pull the mains plug.

DISCARD THE APPLIANCE

1.Disconnect the mains plug from the mains socket.

2.Cut off the mains cable and discard it.

3.Discard the door catch. This pre- vents children or pets to be closed in the appliance. There is a risk of suffocation (only for front-loading appliances).

Image 5
Contents FL L 98485 FL Service ContentsVisit OUR Website for Accessories and ConsumablesFor Perfect Results Child Safety Device Safety InformationGeneral Safety Care and CleaningDiscard the Appliance InstallationTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description Interior AccessoriesTouch Screen Control PanelAuto OFF Button Programme KnobDisplay Shortened duration Memory Buttons Dampf ButtonSTART/PAUSE Button Zeitvorwahl ButtonAcoustic Signals Function Temperature ButtonVorwäsche EinweichenWashing Programmes Sche LEN7 Steam Programmes Consumption ValuesBefore First USE Language SettingClock Setting Loading the Laundry Using the ApplianceActivating the Appliance and Setting a Programme Using the Detergent and Additives Check the position of the flap SET the Delay StartAT the END of Programme Starting a ProgrammeStubborn Stains Helpful Hints and TipsLaundry Load External Cleaning Care and CleaningMaintenance Wash Detergents and Additives Water HardnessDetergent Dispenser Door SealDrum Drain Pump Inlet Hose Filter and the Valve Filter Emergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingProblem Without Alarm Message To deactivate Unpacking InstallationPull out the plastic spacers Positioning and Levelling Water Drainage Inlet HoseEnglish Page English Page English 132940553-A-112011