AEG L 98685 FL, L 98485 FL user manual Pull out the plastic spacers

Page 32

6. Put the front piece on the floor be- hind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to dam- age the hoses.

7.Remove the polystyrene protection from the bottom.

8.Pull up the appliance in vertical po- sition.

9.Remove the power supply cable and the drain hose from the hose holders.

10.Remove the three bolts. Use the key supplied with the appliance.

11.Pull out the plastic spacers.

Image 32

Contents FL L 98485 FL Contents ServiceVisit OUR Website for Accessories and ConsumablesFor Perfect Results Safety Information Child Safety DeviceGeneral Safety Care and CleaningInstallation Discard the ApplianceEnvironment Concerns Technical InformationPackaging Materials Ecological HintsInterior Accessories Product DescriptionControl Panel Touch ScreenAuto OFF Button Programme KnobDisplay Shortened duration Dampf Button Memory ButtonsSTART/PAUSE Button Zeitvorwahl ButtonTemperature Button Acoustic Signals FunctionVorwäsche EinweichenWashing Programmes Sche LEN7 Consumption Values Steam ProgrammesBefore First USE Language SettingClock Setting Loading the Laundry Using the ApplianceActivating the Appliance and Setting a Programme Using the Detergent and Additives SET the Delay Start Check the position of the flapStarting a Programme AT the END of ProgrammeStubborn Stains Helpful Hints and TipsLaundry Load Care and Cleaning External CleaningMaintenance Wash Detergents and Additives Water HardnessDetergent Dispenser Door SealDrum Drain Pump Inlet Hose Filter and the Valve Filter Frost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionProblem Without Alarm Message To deactivate Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water DrainageEnglish Page English Page English 132940553-A-112011