34
THE INLET HOSE
45O |
35O |
•Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the cor- rect position.
• Connect the water inlet hose to the cold water tap with 3/4 thread.
CAUTION!
Make sure that there are no leaks from the couplings.
Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose.
Water-stop device
A
The inlet hose has a water stop device. This device prevents water leaks in the hose because of its natural ageing. The red sector in the window «A» shows this fault .
If this occur, close the water tap and contact the service centre to replace the hose.
WATER DRAINAGE
There are different procedures to con- nect the drain hose: