Starting a programme |
|
21 | |
|
|
You cannot set the delay start with the Steam programme.
STARTING A PROGRAMME
1. Touch button 6 to start the programme. The indicator of button 6 stops to flash and is on with red colour.
If a delayed start is set, the appliance starts the countdown.
The appliance adjust automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. After approximately 15 minutes from the start of the programme, the display shows the new time value.
Interrupt a programme
1.Touch button 6 . The indicator flashes.
2.Touch button 6 again. The washing programme continues.
Cancel a programme
1.Press button 1 to cancel the programme and to deactivate the appliance.
2.Press button 1 again to activate the appliance. Now, you can set a new washing pro- gramme.
The appliance does not drain the water.
Change a function
You can change only some functions before they operate.
1.Touch button 6 . The indicator flashes.
2.Change the function set.
3.Touch button 6 again. The washing programme continues.
Open the door
While a programme or the delay start operates, the appliance door is locked. To open the appliance door:
1.Touch button 6 . The door lock symbol in the display goes off and a message tells you that the door is unlocked.
2.Open the appliance door.
3.Close the appliance door and touch button 6 again. The programme or the delay start continues.
If the temperature and the level of the water is too high, the door lock symbol stays on. You cannot open the door. If necessary, do the following procedure to open the door:
1.Deactivate the appliance.
2.Wait for some minutes.
3.Make sure that no water is in the drum.