AEG L 96485 FL user manual

Page 33

Installation 33

2.Remove the cardboard top.

3.Remove the polystyrene packaging ma- terials.

4.Remove the internal film.

5.Open the door. Remove the polystyrene piece from the door seal and all the items from the drum.

6.Put the front piece on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses.

Image 33

Contents EN Washing Machine For Perfect Results Accessories and ConsumablesContents Children and vulnerable person safety Safety InformationChild safety device General safetyCare and cleaning InstallationInternal lamp Discard the appliance Environment ConcernsPackaging materials Ecological hintsProduct Description Control Panel AccessoriesAuto OFF button Programme knobDisplay Programme duration symbol START/PAUSE Button Extra Quick Acoustic signals functionWashing Programmes Child lock functionPermanent extra rinse function Dern Steam Programmes Consumption values Before First USEUsing the Appliance Language settingClock setting Loading the Laundry Activating the Appliance and Setting a ProgrammeUsing the Detergent and Additives Set the delay start Starting a Programme Cancel a programmeInterrupt a programme Change a functionAT the END of Programme Helpful Hints and TipsLaundry load Stubborn stains Detergents and additivesWater hardness External cleaning Care and CleaningMaintenance wash DescalingDoor seal DrumDetergent dispenser Drain pump Inlet hose filter and the valve filter Emergency drain Frost precautionsProblem Possible cause Possible solution Trouble Shooter and ServiceProblem Without Alarm Message Service Technical Data InstallationUnpacking Page From the bottom Positioning and levelling Install the appliance on a flat hard floorWater-stop device Inlet hoseTo a stand pipe with vent-hole Water drainagePage Page 132940550-A-482010