AEG L 96485 FL user manual Trouble Shooter and Service, Problem Possible cause Possible solution

Trouble shooter and service
	29

WARNING!

Make sure that the temperature is more than 0 °C before you use the appliance again. The manufacturer is not responsible for damages caused by low temperatures.

TROUBLE SHOOTER AND SERVICE

The start of the appliance does not occur or it stops during operation.

Try to find a solution to the problem before you contact the service centre (refer to the table).

With some problems, the acoustic signals operate and the display shows an alarm mes- sage.

WARNING!

Deactivate the appliance before you do the checks.

Problem	Possible cause	Possible solution
The display tells to	The water tap is closed.	Open the water tap.
check the tap: the
appliance does not
fill with water.
	The water inlet hose is dam-	Make sure that the water inlet hose has
	aged.	no damages.
	The filters in the water inlet	Clean the filters. Refer to 'Care and
	hose is blocked .	cleaning'.
	The connection of the water	Make sure that the connection is cor-
	inlet hose is not correct.	rect.
	The water pressure is too low.	Contact your local water authority.
	The water tap is blocked or is	Clean the water tap.
	furred with limescale.
The display tells to	The water drain hose is dam-	Make sure that the water drain hose has
check the drain filter:	aged.	no damages.
the appliance does
not drain the water.
	The filter of the drain pump is	Clean the filter of the drain pump. Refer
	blocked.	to 'Care and cleaning'.
	The connection of the water	Make sure that the connection is cor-
	drain hose is not correct.	rect.
The display tells to	The appliance door is open or	Close the door correctly.
check the door.	not closed correctly.
The display tells there	The anti-flood device is activa-	• Disconnect the appliance.
is a water alert.	ted.	• Close the water tap.
		• Contact the service centre.