Care and cleaning |
|
27 | |
|
|
1
2
5.When the container is full of water, put the drainage duct back again and emp- ty the container. Do steps 4 and 5 again and again until no more water flows out from the drain pump.
6.Pull back the drainage duct and turn the filter to remove it.
7.Remove fluff and objects from the pump.
2 |
1
8.Make sure that the impeller of the pump can turn. If this does not occur, contact the service centre.
9.Clean the filter under the water tap and put it back in the pump into the special guides.
10.Make sure that you tighten correctly the filter to prevent leakages.
11.Put the flap back and close the drain pump door.
The inlet hose filter and the valve filter
It could be necessary to clean the filters when:
•The appliance does not fill with water.
•The appliance fills with the water for a long time.
•The indicator of button 6 flashes and the display shows the related alarm. Refer to 'Trouble shooter and service'.
WARNING!
Disconnect the mains plug from the mains socket.