Installation 37
Water drainage
There are different procedures to connect the drain hose:
With the plastic hose guide.
Without the plastic hose guide.
•On the edge of a sink.
•Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall.
•To a stand pipe with vent-hole.
Refer to the illustration. Directly into a drain pipe at a height of not less than 60 cm and not more than 100 cm. The end of the drain hose must always be venti- lated , i.e. the inner diameter of the drainpipe must be larger than the exter- nal diameter of the drain hose.
•To a sink spigot.
Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. Make sure that the drain hose makes a loop to prevent that remaining particles go in the appliance from the sink.