16 www.aeg.com
5.Measure out the detergent and the fabric conditioner.
6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.
4.To use liquid detergent, turn the flap down.
With the flap in the position
DOWN:
–Do not use gelatinous or thick liquid detergents.
–Do not put more liquid deter- gent than the limit showed in the flap.
–Do not set the prewash phase.
–Do not set the delay start func- tion.
SETTING AND STARTING A PROGRAMME
1.Turn the programme knob. The rela- ted programme indicator comes on.
2.The indicator of button 4 flashes with red colour.
3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related buttons.
4.Set the available functions. The indi- cator of the set function comes on or the display shows the related symbol.
5.Press button 4 to start the pro- gramme. The indicator of button 4 is on.
The appliance adjust automat- ically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum neces- sary time. After approximately 15 minutes from the start of the programme, the display shows the new time value.
CANCEL A PROGRAMME
1.Press button 1 to cancel the pro- gramme and to deactivate the appli- ance.
2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.
The appliance does not drain the water.
CHANGE A FUNCTION
You can change only some functions be- fore they operate.
1.Press button 4 . The indicator flash- es.
2.Change the function set.
SET THE DELAY START
1.Press button 5 again and again until the display shows the number of mi- nutes or hours. The related symbols comes on.
INTERRUPT A PROGRAMME
1.Press button 4 . The indicator flash- es.
2.Press button 4 again. The washing programme continues.
2.Press button 4 , the appliance starts the countdown of the delay start.
When the countdown is completed, the programme starts automatically.