AEG L 75280 FLP user manual Technical Information, Discard the Appliance

Page 5

Do not install and connect a damaged appliance.

Make sure to remove all packaging and transport bolts.

Make sure that the mains plug is dis- connected from the mains socket dur- ing installation.

Only a qualified person must do the electrical installation, the plumbing and the installation of the appliance. This to prevent the risks of structural damage or injury.

Do not install or use the appliance where the temperature is less than 0 °C.

When you install the appliance on a carpet floor, make sure that there is air circulation between the appliance and the carpet. Adjust the feet to have the necessary space between the appliance and the carpet.

Water connection

Do not connect the appliance with old hoses already used. Only use new ho- ses.

Make sure not to cause damage to the water hoses.

Do not connect the appliance to new pipes or pipes not used for a long time. Let the water flow for some minutes, then connect the inlet hose.

The first time you use the appliance, make sure that the water hoses and the couplings do not have leakages.

ENGLISH 5

Electrical connection

Make sure that the appliance is earth- ed.

Make sure that the electrical informa- tion on the rating plate agrees with the power supply.

Always use a correctly installed shock- proof socket.

Do not use multiple plugs and exten- sion cables. There is a risk of fire.

Do not replace or change the mains ca- ble. Contact the service centre.

Make sure not to cause damage to the mains plug and cable.

Connect the mains plug to the mains socket only at the end of the installa- tion. Make sure that there is access to the mains plug after the installation.

Do not pull the mains cable to discon- nect the appliance. Always pull the mains plug.

DISCARD THE APPLIANCE

1.Disconnect the mains plug from the mains socket.

2.Cut off the mains cable and discard it.

3.Discard the door catch. This prevents children or pets to be closed in the appliance. There is a risk of suffoca- tion (only for front-loading applian- ces).

TECHNICAL INFORMATION

Dimensions

Width / Height / Depth

600 / 850 / 605 mm

 

Total depth

640 mm

Electrical connection:

Voltage

230 V

 

Overall power

2200 W

 

Fuse

10 A

 

Frequency

50 Hz

Level of protection against ingress of solid particles

IPX4

and moisture ensured by the protective cover, except

 

where the low voltage equipment has no protection

 

against moisture

 

 

Water supply pressure

Minimum

0,5 bar (0,05 MPa)

 

Maximum

8 bar (0,8 MPa)

 

 

 

Image 5
Contents 75280 FLP Visit OUR Website for ContentsEnvironment Concerns For Perfect Results Accessories and ConsumablesCustomer Care and Service Child Safety Device Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Technical InformationPage Product Description AccessoriesOn OFF Button Control PanelProgramme Knob DisplayTime Save Button Delay Start ButtonAcoustic Signals Function Temperature ButtonExtra Rinse Button Stain ButtonNo Spin ProgrammesTime Save Standard programmes for the Energy Label consumption values Consumption ValuesBefore First USE Using the ApplianceLoading the Laundry Filling the Detergent and AdditivesCheck the position of the flap Cancel a Programme Setting and Starting a ProgrammeSET the Delay Start Change a FunctionOpen the Door Cancel the Delay StartAT the END of the Programme Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Medium Care and Cleaning Drain Pump Detergent DispenserPage Emergency Drain Inlet Hose FilterValve Filter Frost Precautions Troubleshooting Delay start is set English Unpacking InstallationEnglish Positioning and Levelling Water Drainage Inlet HosePage English Page English 132930671-A-492011