AEG L 75280 FLP user manual AT the END of the Programme, Cancel the Delay Start, Open the Door

Page 17

Before you press button 4 to start the appliance, you can cancel or change the set of the delay start.

You cannot set the delay start with the Steam programme.

CANCEL THE DELAY START

1.Press button 4 . The related indica- tor flashes.

2.Press button 5 again and again until the display shows 0’.

3.Press button 4 . The programme starts.

OPEN THE DOOR

While a programme or the delay start op- erates, the appliance door is locked.

To open the appliance door:

1.Press button 4 . The door lock sym- bol in the display goes off.

ENGLISH 17

2.Open the appliance door.

3.Close the appliance door and press button 4 . The programme or the delay start continues.

If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow:

1.Deactivate the appliance.

2.Wait for some minutes.

3.Make sure that no water is in the drum.

If you deactivate the appliance, it is necessary to set the programme again.

AT THE END OF THE PROGRAMME

The appliance stops automatically.

The acoustic signals operate.

In the display comes on.

The indicator of the Start/Pause button 4 goes off.

The door lock symbol goes off.

Press button 1 to deactivate the ap- pliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance.

When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cy- cle.

Remove the laundry from the appli- ance. Make sure that the drum is emp- ty.

Keep the door ajar, to prevent mildew and odours.

Close the water tap.

The washing programme is completed, but there is water in the drum:

The drum turns regularly to prevent the creases in the laundry.

The door stays locked.

You must drain the water to open the door.

To drain the water:

1.If necessary, decrease the spin speed.

2.Press the Start/Pause button 4 . The appliance drain the water and spin.

3.When the programme is completed and the door lock symbol goes off, you can open the door

4.Deactivate the appliance.

The appliance drain and spin au- tomatically after approximately 18 hours.

Image 17
Contents 75280 FLP Visit OUR Website for ContentsEnvironment Concerns For Perfect Results Accessories and ConsumablesCustomer Care and Service Child Safety Device Safety InformationGeneral Safety Care and CleaningDiscard the Appliance Technical InformationPage Product Description AccessoriesOn OFF Button Control PanelProgramme Knob DisplayTime Save Button Delay Start ButtonAcoustic Signals Function Temperature ButtonExtra Rinse Button Stain ButtonNo Spin ProgrammesTime Save Standard programmes for the Energy Label consumption values Consumption ValuesBefore First USE Using the ApplianceLoading the Laundry Filling the Detergent and AdditivesCheck the position of the flap Cancel a Programme Setting and Starting a ProgrammeSET the Delay Start Change a FunctionOpen the Door Cancel the Delay StartAT the END of the Programme Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Medium Care and Cleaning Drain Pump Detergent DispenserPage Emergency Drain Inlet Hose FilterValve Filter Frost Precautions Troubleshooting Delay start is set English Unpacking InstallationEnglish Positioning and Levelling Water Drainage Inlet HosePage English Page English 132930671-A-492011