Troubleshooting

ENGLISH 25

The start of the appliance does not occur or it stops during operation.

First try to find a solution to the problem (refer to the table). If not, contact the serv- ice centre.

With some problems, the acoustic signals operate and the display shows an alarm code:

• - The appliance does not fill with water.

• - The appliance does not drain the water.

• - The appliance door is open or not closed correctly.

• - The anti-flood device is on.

WARNING!

Deactivate the appliance before you do the checks.

Problem	Possible cause	Possible solution
The appliance	The water tap is closed.	Open the water tap.
does not fill with
water.
	The water inlet hose is	Make sure that the water inlet
	damaged.	hose has no damages.
	The filters in the water in- Clean the filters. Refer to 'Care
	let hose is blocked .	and cleaning'.
	The water tap is blocked	Clean the water tap.
	or is furred with lime-
	scale.

The connection of the water inlet hose is not correct.

Make sure that the connection is correct.

The water pressure is too low.

Contact your local water authori- ty.

The appliance	The water drain hose is	Make sure that the water drain
does not drain the	damaged.	hose has no damages.
water.

The filter of the drain pump is blocked.

Clean the filter of the drain pump. Refer to 'Care and clean- ing'.

The connection of the water drain hose is not correct.

Make sure that the connection is correct.