AEG L 60260 FL user manual Temperature Button, Acoustic Signals Function, Child Lock Function

Page 10

10

TEMPERATURE BUTTON 9

Press button 9 to change the default temperature.

= cold water

ACOUSTIC SIGNALS

FUNCTION

You can hear the acoustic signals when:

•You activate the appliance.

•You deactivate the appliance.

•You press the buttons.

•The programme is completed.

•The appliance has a malfunction. To deactivate/activate the acoustic signals, press button 8 and button 9 at the same time for 6 seconds.

If you deactivate the acoustic signals, they continue operate only when you press the buttons and when a malfunction occurs.

CHILD LOCK FUNCTION

This function prevents children to play with the control panel.

• To activate the function, press button

6and button 7 at the same time

until the display shows the symbol

.

•To deactivate the function, press but- ton 6 and button 7 at the same time until the symbol goes off.

You can activate the function:

•Before you press the Start/Pause but- ton 4 : the appliance cannot start.

•After you press the Start/Pause but- ton 4 , all the buttons and the pro- gramme knob are deactivated.

PERMANENT EXTRA RINSE FUNCTION

With this function you can keep the ex- tra rinse function permanently on when you set a new programme.

•To activate the function press button 5 and button 6 at the same time

until the indicator of button 7 is on.

•To deactivate the function press but- ton 5 and button 6 at the same time until the indicator of button 7 is off.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents 60260 FL Contents ServiceFor Perfect Results Accessories and ConsumablesVisit OUR Website for Care and Cleaning Safety InformationGeneral Safety InstallationWater connection Discard the AppliancePackaging Materials Environment ConcernsTechnical Information Ecological HintsAccessories Product DescriptionDisplay Control PanelOn OFF Button Programme KnobTime Save Button Delay Start ButtonSTART/PAUSE Button Extra Rinse ButtonChild Lock Function Temperature ButtonAcoustic Signals Function Permanent Extra Rinse FunctionProgrammes Consumption Values Programme Energy consumption Water consumpStandard programmes for the Energy Label consumption values Before First USE Using the ApplianceLoading the Laundry Filling the Detergent and Additives Check the position of the flapCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme AT the END of the Programme SET the Delay StartCancel the Delay Start Change a FunctionPage Stubborn Stains Hints and TipsLaundry Load Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpEnglish Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainagePage English 132936510-A-212011
Top Page Image Contents