AEG L 60260 FL Setting and Starting a Programme, Interrupt a Programme, Cancel a Programme

Page 16

16

5.Measure out the detergent and the fabric conditioner.

6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.

3.To use powder detergent, turn the flap up.

4.To use liquid detergent, turn the flap down.

With the flap in the position

DOWN:

Do not use gelatinous or thick liquid detergents.

Do not put more liquid deter- gent than the limit showed in the flap.

Do not set the prewash phase.

Do not set the delay start function.

SETTING AND STARTING A PROGRAMME

1.Turn the programme knob. The re- lated programme indicator comes on.

2.The indicator of button 4 flashes with red colour.

3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related but- tons.

4.Set the available functions. The in- dicator of the set function comes on or the display shows the related symbol.

5.Press button 4 to start the pro- gramme. The indicator of button 4 is on.

INTERRUPT A PROGRAMME

1.Press button 4 . The indicator flashes.

2.Press button 4 again. The wash- ing programme continues.

CANCEL A PROGRAMME

1.Turn the programme knob to to cancel the programme.

2.Turn again the programme knob to a new washing programme. At this time you can also set the available functions.

The appliance does not drain the water.

Image 16
Contents 60260 FL Contents ServiceFor Perfect Results Accessories and ConsumablesVisit OUR Website for Safety Information General SafetyCare and Cleaning InstallationWater connection Discard the ApplianceEnvironment Concerns Technical InformationPackaging Materials Ecological HintsAccessories Product DescriptionControl Panel On OFF ButtonDisplay Programme KnobDelay Start Button START/PAUSE ButtonTime Save Button Extra Rinse ButtonTemperature Button Acoustic Signals FunctionChild Lock Function Permanent Extra Rinse FunctionProgrammes Consumption Values Programme Energy consumption Water consumpStandard programmes for the Energy Label consumption values Before First USE Using the ApplianceLoading the Laundry Filling the Detergent and Additives Check the position of the flapCancel a Programme Setting and Starting a ProgrammeInterrupt a Programme SET the Delay Start Cancel the Delay StartAT the END of the Programme Change a FunctionPage Hints and Tips Laundry LoadStubborn Stains Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Care and Cleaning Detergent Dispenser Drain PumpEnglish Inlet Hose Filter Valve FilterFrost Precautions Emergency DrainTroubleshooting Problem Possible cause Possible solutionDelay start is set Problem Possible cause Possible solution Installation UnpackingPull out the plastic spacers Positioning and Levelling Inlet Hose Water-stop device Water DrainagePage English 132936510-A-212011