AEG L 60260 FL user manual Care and Cleaning

Page 21

CARE AND CLEANING

WARNING!

Disconnect the appliance from the mains supply before you clean it.

DESCALING

The water we use contains limescale. If it becomes necessary, use a water soft- ener to remove limescales.

Use a special product made for wash- ing machines. Obey the instructions that you find on the packaging of the manufacturer.

Do this separately from the laundry wash.

EXTERNAL CLEANING

Clean the appliance only with soap and warm water. Fully dry all the surfaces.

DOOR SEAL

ENGLISH 21

CAUTION!

Do not use alcohol, solvents or chemical products.

MAINTENANCE WASH

With the low temperature programmes it is possible that some detergent stays in the drum. Make regularly a mainte- nance wash. To do this:

Empty the laundry from the drum.

Set the hottest cotton wash pro- gramme

Use a correct quantity of powder de-

tergent with biological properties. After each wash, keep the door open for a while to prevent mould and to let unpleasant smells go out.

Regularly examine the seal and remove all objects from the inner part.

DRUM

Regularly examine the drum to prevent limescale and rust particles.

Only use special products to remove rust particles from the drum.

To do this:

Clean the drum with special product for stainless steel.

Start a short programme for cotton at the maximum temperature with a small quantity of detergent.

Image 21
Contents 60260 FL Service ContentsAccessories and Consumables For Perfect ResultsVisit OUR Website for General Safety Safety InformationCare and Cleaning InstallationDiscard the Appliance Water connectionTechnical Information Environment ConcernsPackaging Materials Ecological HintsProduct Description AccessoriesOn OFF Button Control PanelDisplay Programme KnobSTART/PAUSE Button Delay Start ButtonTime Save Button Extra Rinse ButtonAcoustic Signals Function Temperature ButtonChild Lock Function Permanent Extra Rinse FunctionProgrammes Programme Energy consumption Water consump Consumption ValuesStandard programmes for the Energy Label consumption values Using the Appliance Before First USELoading the Laundry Check the position of the flap Filling the Detergent and AdditivesSetting and Starting a Programme Cancel a ProgrammeInterrupt a Programme Cancel the Delay Start SET the Delay StartAT the END of the Programme Change a FunctionPage Laundry Load Hints and TipsStubborn Stains Detergents and AdditivesLevel Type Water hardness Mmol/l Clarke Care and Cleaning Drain Pump Detergent DispenserEnglish Valve Filter Inlet Hose FilterEmergency Drain Frost PrecautionsProblem Possible cause Possible solution TroubleshootingDelay start is set Problem Possible cause Possible solution Unpacking InstallationPull out the plastic spacers Positioning and Levelling Inlet Hose Water Drainage Water-stop devicePage English 132936510-A-212011